| PART |
Description |
Maker |
| DPS-150AB-15 |
Active PFC design, which can improve the performance on ripple noise and also be benefit for saving energy.
|
Delta Electronics, Inc.
|
| 59160-3-T-00-A 59160-3-T-00-B 59160-3-T-00-C 59160 |
Surface Mount Features and Benefits
|
ETC
List of Unclassifed Manufacturers
Electronic Theatre Controls, Inc.
|
| PIC18F86J15I/PTQTP PIC18F87J10TI/PTQTP PIC18F87J10 |
Ideal for large low power and connectivity applications that benefit from the availability of four serial ports: double synchronous ...
64/80-Pin High-Performance, 1-Mbit Flash Microcontrollers with nanoWatt Technology
|
Microchip Technology
|
| MCP18480 |
The MCP18480 is a –48V Hot Swap Controller with fully configurable features. This Hot Swap Controller have OVLO, UVLO protection features on top of Foldback Current Limiting and Circuit Breaker features. Although ideally suited optic
-48V Hot Swap Controller
|
MICROCHIP[Microchip Technology]
|
| PC617 PC6172C-12C PC6172C-12CC PC6172C-12CT PC6172 |
POWER/SIGNAL RELAY, DPST, MOMENTARY, 0.083A (COIL), 6VDC (COIL), 498mW (COIL), PCB MOUNT-STRAIGHT
POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.041A (COIL), 12VDC (COIL), 492mW (COIL), PCB MOUNT-STRAIGHT
Automotive Twin PCB Power Relay
|
PICKER[Picker Components]
|
| 0678005001 678005001 |
1.27mm (.050") Pitch Serial ATA High Speed Header, Vertical, Surface Mount, withLocking Latch, 7 Circuits, Gold (Au) Flash, for 1.60mm (.063") PCB, with PCB Loc
|
Molex Electronics Ltd.
|
| B82725-J2802-N20 B82721 B82721-A2122-N20 B82721-A2 |
DROSSEL NETZ PCB LIEGEND 18MH 2.0A 德罗塞尔Netz公司印刷电路板LIEGEND 18MH 2.0安培
DROSSEL NETZ PCB LIEGEND 56MH 0.5A 德罗塞尔Netz公司LIEGEND 56MH 0.5A的电路板
DROSSEL NETZ PCB STEHEND 10MH 1.0A 德罗塞尔Netz公司印刷电路板STEHEND 10MH安培
DROSSEL NETZ PCB STEHEND 27MH 0.5A 德罗塞尔Netz公司STEHEND 27MH 0.5A的电路板
德罗塞尔Netz公司1.4A的电路板STEHEND 27MH
德罗塞尔Netz公司1.5A的电路板STEHEND 3.3MH
德罗塞尔Netz公司STEHEND 1.2MH 3.0A的电路板
DROSSEL NETZ PCB LIEGEND 27MH 1.4A
DROSSEL NETZ PCB LIEGEND 47MH 1.0A
DROSSEL NETZ PCB LIEGEND 10MH 2.0A
DROSSEL NETZ PCB LIEGEND 1.8MH 6.0A
DROSSEL NETZ PCB LIEGEND 3.9MH 4.0A
DROSSEL NETZ PCB LIEGEND 0.4MH 3.6A
DROSSEL NETZ PCB LIEGEND 0.4MH 2.6A
DROSSEL NETZ PCB LIEGEND 6.8MH 2.0A
DROSSEL NETZ PCB LIEGEND 82MH 0.5A
DROSSEL NETZ PCB LIEGEND 27MH 0.5A
DROSSEL NETZ PCB LIEGEND 3.3MH 1.5A
DROSSEL NETZ PCB LIEGEND 2.7MH 8.0A
DROSSEL NETZ PCB LIEGEND 3.3MH 4.0A
DROSSEL NETZ PCB LIEGEND 5.6MH 2.0A
DROSSEL NETZ PCB STEHEND 3.3MH 1.5A
DROSSEL NETZ PCB STEHEND 18MH 0.5A
DROSSEL NETZ PCB STEHEND 0.4MH 3.6A
DROSSEL NETZ PCB STEHEND 0.4MH 2.6A
DROSSEL NETZ PCB LIEGEND 1.2MH 3.0A
DROSSEL NETZ PCB LIEGEND 10MH 1A
DROSSEL NETZ PCB LIEGEND 1MH 2.0A
DROSSEL NETZ PCB LIEGEND 2.2MH 2.0A
DROSSEL NETZ PCB LIEGEND 2.7MH 4.0A
DROSSEL NETZ PCB STEHEND 1MH 2.0A
DROSSEL NETZ PCB LIEGEND 27MH 1.0A
DROSSEL NETZ PCB STEHEND 27MH 0.4A
DROSSEL NETZ PCB LIEGEND 10MH 0.7A
DROSSEL NETZ PCB STEHEND 10MH 0.7A
DROSSEL NETZ PCB LIEGEND 27MH 0.4A
DROSSEL NETZ PCB STEHEND 5.6MH 2.0A
DROSSEL NETZ PCB STEHEND 56MH 0.5A
DROSSEL NETZ PCB STEHEND 2.7MH 4.0A
DROSSEL NETZ PCB STEHEND 3.3MH 4.0A
DROSSEL NETZ PCB STEHEND 6.8MH 2.0A
DROSSEL NETZ PCB STEHEND 27MH 1.4A
DROSSEL NETZ PCB STEHEND 33MH 1.0A
DROSSEL NETZ PCB STEHEND 82MH 0.5A
DROSSEL NETZ PCB LIEGEND 3.9MH 6.0A
DROSSEL NETZ PCB LIEGEND 6.8MH 4.0A
DROSSEL NETZ PCB LIEGEND 1.8MH 10.0A
DROSSEL NETZ PCB LIEGEND 68MH 1.0A
DROSSEL NETZ PCB STEHEND 6.8MH 1.2A
DROSSEL NETZ PCB LIEGEND 6.8MH 1.2A
DROSSEL NETZ PCB STEHEND 1.2MH 3.0A
DROSSEL NETZ PCB STEHEND 47MH 0.3A
DROSSEL NETZ PCB STEHEND 2.2MH 2.0A
Chokes for Power Lines Current-Compensated Ring Core Double Chokes
|
Microchip Technology, Inc.
EPCOS AG
EPCOS[EPCOS]
|
| HNC1-2.5P-12DSL HNC2-2.5P-10DS HNC2-2.5P-10DSL HNC |
2.5mm Pitch Connector for Discrete Wire Connection 2.5毫米间距连接线连接离
RESISTOR 2.4 OHM .5W CARB COMP 2.5毫米间距连接线连接离
Inductor; Series:IHLP-2525CZ; Inductance:4.7uH; Inductance Tolerance: /- 20 %; Terminal Type:PCB Surface Mount; Current Rating:5.5A; Leaded Process Compatible:Yes; Mounting Type:Surface Mount; Packaging:Tape And Reel 2.5毫米间距连接线连接离
Inductor; Series:IHLP-2525CZ; Inductance:3.3uH; Inductance Tolerance: /- 20 %; Terminal Type:PCB Surface Mount; Current Rating:6A; Leaded Process Compatible:Yes; Mounting Type:Surface Mount; Packaging:Cut Tape
INDUCTOR 2525CZ 0.47 UH 20% LOW PROFILE HIGH CURRENT
Inductor; Inductor Type:High Frequency; Inductance:2.2uH; Inductance Tolerance: 20 %; Current Rating:8A; Series:IHLP-2525CZ; Package/Case:PCB Surface Mount; Leaded Process Compatible:Yes; Mounting Type:Surface Mount RoHS Compliant: Yes
|
HIROSE ELECTRIC Co., Ltd.
Hirose Electric USA, INC.
HIROSE[Hirose Electric]
|
| CXE380A5 CXE380A5-B CXE380A5R |
PCB Mount
|
Crydom Inc.,
|
| ASO24111 |
PCB Mount
|
Crydom Inc.,
|
